BLMBW - 24 3405 STAIN KILLER

  • MSDS: BLMBW
  • Manufacturer: VALSPAR CORP
  • Product Name: 24 3405 STAIN KILLER
  • National Stock Number: 8010-00N020323
Product Identification

Product ID:24 3405 STAIN KILLER
MSDS Date:07/02/1989
FSC:8010
NIIN:00N020323
MSDS Number: BLMBW

Responsible Party
VALSPAR CORP
1101 THIRD ST SOUTH
MINNEAPOLIS, MN 55415
US

Emergency Phone: 800-228-5635

Info Phone: 612-332-7371

Cage: 13374

Contractor
VALSPAR CORPORATION
MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/888-345-5732

Cage: 23526

Ingredients

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 15%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10 - 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ALKYD RESIN

CAS: 68122-73-6

Fraction By Weight: 20%


VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 25%

OSHA PEL 300 PPM;400 STEL

ACGIH TLV: 300 PPM


KEROSENE (PETROLEUM), HYDROTREATED; (MINERAL SPIRITS)

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 10%


BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED. MAY AFFECT
THE BRAIN, NERV SYS OR RESPIRATORY SYS, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESP IRRIT. OVEREXPOSURE TO INGREDIENTS IN THIS
PRODUCT MAY CAUSE NOSE AND THROAT I RRIT, EYE IRRIT, SKIN IRRIT.
CHRONIC: NOTICE: REPORTS HAVE ASSOCIATED REAPEATED AND PROLONGED
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OCCUPATIONAL OVEREXPOSURE TO SOLVENTS
WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

First Aid

First Aid:INHAL: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL
ATTENTION. EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH
WITH SOAP AND WATER . INGEST: GET MD IMMEDIATELY .

Fire Fighting

Flash Point Method:TCC
Flash Point:76.0F,24.4C
Lower Limits:1 %
Upper Limits:19 %
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR NIOSH/MSHA APPRVD SCBA
OR AIR MASKS AND FULL PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO
FIRE SHOULD BE KEPT COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:CNTNS OXIDIZING MATLS. CONTAM RAGS,
WIPES, SAWDUST, ETC, MAY CATCH FIRE SPONTANEOUSLY. STORE WASTE
UNDER H2O IN CLOSED METAL CNTNRS UNTIL DISPOSED (SUPP DATA)

Accidental Release

Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA OR AIRMASK FOR LARGE SPILLS IN A CONFINED
AREA. ELIMINATE IGNITION SOURCES. REMOVE WITH INERT ABSORBENT AND
NON- SPARKING TOOLS. AVOID CONTACT WITH EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CNTNRS SHOULD BE GROUNDED/BONDED WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. KEEP
AWAY FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT STORE
ABOVE 120 F. BASED ON THE PRODUCT FLASH POINT AND VAPOR PRESSURE
SUITABLE STORAGE SHOULD BE PROVIDED IN ACCORDANCE WITH OSHA
REGULATION 1910.106. EM PTY CNTNRS MAY CNTNR PROD (SUPP DATA)

Exposure Controls

Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIR ECTIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA. VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF. ELIM IGNITION SOURCES
Protective Gloves:USUAL HAND PROT FOR PAINT APPLICATION.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: OF IN COMPLIANCE WITH ALL APPLICABLE REGULATIONS. OTHER
PREC: RESIDUE, INCLUDING FLAMMABLE OR EXPLOSIVE VAPORS. DO NOT CUT,
PUNCTURE OR WELD ON OR NEAR CONTAINER. ALL LABEL WARNINGS MUST BE
OBSERVED UNTIL THE CONTAINER HAS BEEN CLEANED OR RECONDITIONED.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:240F,116C
Vapor Pres:15 @ 100 F
Vapor Density:5.1
Spec Gravity:1.28
Evaporation Rate & Reference:0.9 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:57.18

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON
DIOXIDE/MONOXIDE AND METAL OXIDES.

Disposal

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL STATE AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.